Carpenter

Hybrid-based

ONET: 47-2031.00

2

Years

41

Skills

352h

Related instructions

4998h

On-the-job training

Curriculum

New Hire / Apprentice Orientation
Company Safety Training
Internal Training (Supervisor/Mentor Led)
BCT 111 - Blueprint Reading and Specifications
BCT 142 - Fundamentals of Construction Safety
BCT 210 - Interior/Exterior Installations
BCT 102 - Fundamentals of Building Construction
BCT 224 - Building Materials
BCT 240 - Green Residential Construction Overview
BCT 244 - Site Layout / Foundation Types
Drawings Course (46 min)
RFI Course (36 min)
Inspections Course (34 min)
Observations Course (32 min)
Punch Lits Course (36 min)
Daily Log Course (25 min)
Incidents Course (26 min)
T&M Tickets Course (27 min)
Action Plans Course (30 Min)
Commitments Course (28 Min)
Commitment Course 2.0
Conversations Tools (29 Min)
Correspondance Tool (28 Min)
Directory Tool Course
Document Tool Course

On-the-job training

Safety
- Proper use of personal protection equipment
- Proper use of ladders and scaffolds
- Proper use of electrical protection
- Proper use of power tools
- Proper use of fall protection
- Follow established safety rules and regulations and maintain a safe and clean environment
- Work with or remove hazardous material
Tools and Materials
- Measuring and marking tools
- Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge
- Leveling and layout tools
- Verify trueness of structure, using plumb bob and level
- Boring and cutting tools
- Fastening and dismantling tools
- Saws, drills and drivers
- Fastening tools (power-actuated, etc.)
- Safely set up and use sawhorses
- Build a sawhorse and other construction aids
- Wood and lumber
- Shape or cut materials to specified measurements, using hand tools, machines, or power saws
- Engineering products, panels and sheet goods
- Fasteners
General Carpentry
- Blueprints and layout
- Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required
- Concrete forms
- Construct forms or chutes for pouring concrete
- Wooding framing
- Shape or cut materials to specified measurements, using hand tools, machines, or power saws
- Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue
- Examine structural timbers and supports to detect decay, and replace timbers as required, using hand tools, nuts, and bolts
- Metal framing
- Scaffolds
- Erect scaffolding or ladders for assembling structures above ground level
- Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools
- Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base
- Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools
- Arrange for subcontractors to deal with special areas, such as heating or electrical wiring work
- Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures
- Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling
- Maintain records, document actions, and present written progress reports
- Select and order lumber or other required materials
- Maintain job records and schedule work crew