Electronics Assembler

Competency-based

ONET: 51-2011.00

RAPIDS: 145983

1

Years

29

Skills

175h

Related instructions

Classroom instruction topics

Apprenticeship Employer Onboarding
ESD Control for Electronics Manufacturing
Safety for Electronics Manufacturing
Foreign Object Debris/Damage
Electronics Assembly for Operators
IPC Soldering Fundamentals I
IPC J-STD-001 for Operators
IPC J-STD-001 Certification (CIS)
IPC A 610 for Operators
IPC A 610 Certification (CIS)

On-the-job training

Operate Machinery and Tooling
- Operate various machinery and modify settings as needed to meet design specifications.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and/or index points.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
Review and assemble according to blueprints or other instructions to determine operational methods or sequences.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts to assemble hardware.
Soldering
- Place and solder resistors, diodes, capacitors, transistors, wires and integrated circuits onto printed circuit boards needed for assembly or installation, using shop machinery or equipment according to standards and/or specifications.
Inspect installed components or assemblies.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Perform quality checks to identify faulty components to rework and replace them as required.
Rework or Repair parts or assemblies.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation in compliance with standards.
Maintain a clean and safe work environment.
- Move equipment, material, and tools within the immediate production area to maintain a clean and safe work environment.
Assemble electrical or electronic equipment.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Fabricate and assemble prototypes, production or integrated-technology hardware for new, existing or emerging technologies related to assemblies, sub-assemblies, cables, harnesses, printed circuit boards or similar electronic components as required.
Operate mechanical components in production equipment.
- Install, align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools to meet design specifications.
Mark products, workpieces, or equipment with identifying information.
- Mark identifying information on tubing or production assemblies, using etching devices, labels, rubber stamps, or other approved methods.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Verify dimensions of assemblies or components, using measuring instruments.
Behavioral Competencies
- Maintains an acceptable attendance record
- Reports to work on time
- Completes assigned tasks on time
- Follows safety rules
- Demonstrates respect for co-workers and supervisors
- Maintains a positive attitude
- Cooperates with and assists co-workers
- Follows instructions/directions
- Works under supervision
- Accepts constructive feedback and criticism
- Adheres to work policies/rules/regulations
- Takes care of equipment and workplace
- Keeps work area neat and clean
- Meets supervisor's work standards
- Demonstrates trust, honesty, and integrity