Line Maintainer
Hybrid-based
ONET: 49-9051.00
RAPIDS: 0283
4
Years
51
Skills
1064h
Related instructions
7200h
On-the-job training
Curriculum
- 1st Year NJATC
- 2nd Year NJATC
- 3rd Year NJATC
- 4th Year Day School
- Secondary School
- Transformer Theory
- Hotstick School
- Hotstick Refresher - 2nd Yr
- Hotstick Refresher - 3rd Year
- Hotstick Refresher - 4th Year
- 2nd Year Lineman Formal JPEs
- 4th Year Top Out Testing - Lineman
On-the-job training
- Basic Line Work Training, Proper Tool & Equipment Use, Safety Procedures, Field Schools
- Transmission/Construction
- Distribution/Construction (OH & UG)
- Operations and Maintenance
- Classroom Hours
- PTO/STD/No-Pay/HOL/Sleep
- JPEs - 1st Year (1-6 and 2-6 Step)
- (AL-01) Set Wood Pole and Install Anchor and Guy Wire
- (AL-02) Remove Wood Pole
- (AL-03) Pull New Overhead Line (New Construction)
- (AL-04) Pull Underground Cable
- (AL-05) Install Pad Mounted Transformer (New Construction)
- (AL-06) Install Pad Mounted Switching Cabinet (New Construction)
- (AL-07) Terminate Single-Phase Secondary Cable in Meter Panel
- (AL-08) Set A Single-Phase Meter On Customer Panel
- (AL-09) Install Transformer on Steel Pole (New Construction)
- (AL-10) Check Voltage and Rotation On A 3 Phase Transformer
- (AL-12) Install a Span(s) Secondary
- (AL-13) Repair Open Wire Secondary
- (AL-14) Splice Conductors
- (AL-15) Terminate Elbows
- (AL-16) Terminate Terminators
- (AL-17) Terminate T-bodies
- (AL-18) Build Single Phase Transition Pole (New Construction)
- (AL-58) Pole Top Rescue on the Wood
- JPEs - 2nd Year (3-6 and 4-6 Step)
- (AL-20) Cover Rubber Energized Primary Using A Bucket Truck using RPE Cover Energized Primary Bucket Truck
- (AL-21) Replace Bell
- (AL-22) Replace Crossarm with Primary Energized
- (AL-25) Double Dead End A Single Phase Conductor
- (AL-27) Pick Up A Contact Tag
- (AL-28) Check Conductors For Correct Phasing
- (AL-29) Check Amps On A Primary Circuit
- (AL-30) Open A Switch With Load Break Tool
- (AL-31) Install Open Delta 120-240-208 Transformer Bank (New Construction)
- (AL-48) Release New Equipment From Construction To Operations
- (AL-46) Hi-Pot a Cable
- JPEs - 3rd Year (5-6 and 6-6 Step)
- (AL-32) Change Taps In A Transformer
- (AL-33) Replace NX Fuse In Dead Front Cabinet.
- (AL-34) Set Up Bucket Truck and Operate Controls in Primary Area
- (AL-35) Replace Overhead Fuse With Extendo Stick
- (AL-36) Spread Overhead Conductors
- (AL-37) Set Steel Pole Near Energized Conductors
- (AL-38) Change Out A Disconnect Switch
- (AL-39) Replace A Cutout On A Capacitor
- (AL-40) Switch Overhead Capacitor Bank Out Of Service And Back In Service
- (AL-43) Replace Underground Oil Switch On Capacitor Bank
- (AL-44) Replace Underground Capacitor Can
- JPEs - 4th Year (7-6 and 8-6 Step)
- (AL-47) Pick Up And Release A Clearance
- (AL-50) Remove Load Side Links in a Legacy Style Network Protector (CM52 or 14) Or Viso Rods
- (AL-51) Open Close J-switch On Pad Mounted Switching Cabinet
- (AL-52) Build A Three Phase 12000 Volt Transformer Bank
- (AL-56) Build A Three Pot Transformer Bank
- (AL-57) Replace Cut Out On 3 Phase Dip Pole
- (AL-62) By Pass Regulator
- (AL-63) Install Contact Tag
- (AL-66) Replace Insulator on a Steel Pole
- (AL-67) Install / Replace Recloser
- (AL-68) Change Out 200 Amp Switch in Switching Cabinet
FIND APPRENTICESHIPS BY STATE
AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaVirgin IslandsWashingtonWashington D.C.West VirginiaWisconsinWyoming
Made in the USA.